Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place a fingernail in the notch at the bottom edge of the phone.
-
Pull on the back cover with one hand while keeping the rest of the phone steady, and run your fingernail along the edge.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place a fingernail in the notch at the bottom edge of the battery.
-
Pull the battery out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the SIM card in the top right corner on the back of the phone.
-
Remove the SIM card by pushing it with your thumb from left to right.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove all 9 screws on the back by using a Phillips head #00 screwdriver.
-
To remove the screws rotate them counterclockwise.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert a plastic opening tool in the split at the bottom of the phone (between the bottom shield and the rest of the phone).
-
Pry the bottom shield to separate it from the phone.
-
Once it is loose you should be able to remove it with your hand.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the flat end of the Spudger between the screen and the chromed frame.
-
Once inserted, run the Spudger along the frame to separate the front part of the phone from the back shield.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the flat end of the Spudger or the plastic opening tool underneath the camera connector.
-
Gently lever the camera connector free.
-
Once disconnected, take the camera out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
The front camera can be removed in a similar way as the rear camera. See previous step.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a Spudger, separate the motherboard from the back frame.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Heat the screen up using a heat gun (or the IOpener) to loosen up the screen. The heat gun needs to be moved around the edges of the phone in order to equally heat the edges.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pick the Jimmy and slide it's blade around the edge of the screen.
-
Separate the screen from the frame.
-
Cancelar: No complete esta guía.
6 personas más completaron esta guía.
2 comentarios
“Works for the Phoenix 3 as well but I wouldn’t try taking out the rear facing camera. You shouldn’t have to either way” -dtcarani
Thank you dtcarani it absolutely does work for the Phoenix 3.
And, I did not need to remove the rear facing camera.