Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the back cover by firmly pressing the triangle and push upwards.
-
Lift the bottom section to remove the cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Peel off the sticker with the metal spudger.
-
Remove one 1mm PH000 screw.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pry open all four sides of the back-frame gently, using the metal spudger.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pry off the connector using the iFixit opening tool to remove the communication board.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pry off the connectors using the iFixit opening tool.
-
Disconnect the antenna using the iFixit opening tool.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the connector using the metal spudger.
-
Peel back the tape on the side.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pry open the two plastic hooks using the metal spudger tool.
-
Crack open the black plastic cover using the metal spudger tool. The cover should be easily turned over.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.