Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the rear cover by placing the plastic opening tool in the groove on the bottom left side of the LG G4 and gently prying up.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place the plastic opening tool at the bottom edge of the battery and lift up. Carefully remove battery with your hands.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the eleven 3.9 mm Phillips #00 screws found at the back of the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once all the screws have been removed, place the plastic opening tool in the lower left corner and firmly lift the cover up.
-
Detach the cover with your fingers
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the following four press-fit connectors with the flat edge of a plastic spudger or opening tool:
-
Front-facing camera connector.
-
Rear-facing camera connector.
-
Digitizer connector.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the motherboard by lifting it up using the plastic opening tool and your fingers .
-
Cancelar: No complete esta guía.
54 personas más completaron esta guía.
25 comentarios
Where can I get a motherboard? I have been looking everywhere with no luck.
If you had it less then a year lg will send u a replacement but if your phone is damaged they will charge u just say it's not damage and swap the boards and send them the new one back so u won't be charged they won't notice I just did it
i have to ask did they ever notice with the swap???
mklb492 -
If my phone has the boot loop problem and i change the board will mi picture still be there ??
Did you find a resolution to this problem? I am facing the same thing!