Saltar al contenido principal

LG G3 Vigor Headphone Jack Replacement

Qué necesitas

  1. LG G3 Vigor Headphone Jack Replacement, Rear Case: paso 1, imagen 1 de 1
    • Locate the notch on the bottom right of the phone.

  2. LG G3 Vigor Headphone Jack Replacement: paso 2, imagen 1 de 1
    • Gently pull the cover on the back of the phone off to locate the battery.

  3. LG G3 Vigor Headphone Jack Replacement, Battery: paso 3, imagen 1 de 1
    • Remove the battery by lifting from the slot at the bottom of the battery.

  4. LG G3 Vigor Headphone Jack Replacement, Midframe: paso 4, imagen 1 de 1
    • Remove the twelve Phillips #00 screws securing the midframe to the rest of the phone.

  5. LG G3 Vigor Headphone Jack Replacement: paso 5, imagen 1 de 3 LG G3 Vigor Headphone Jack Replacement: paso 5, imagen 2 de 3 LG G3 Vigor Headphone Jack Replacement: paso 5, imagen 3 de 3
    • Work a plastic opening tool around the perimeter of the phone to separate the midframe from the rest of the phone.

  6. LG G3 Vigor Headphone Jack Replacement, Rear Facing Camera: paso 6, imagen 1 de 1
    • Use the spudger to gently unplug the ribbon cable connected to the motherboard. Then remove the rear facing camera.

  7. LG G3 Vigor Headphone Jack Replacement, Front Facing Camera: paso 7, imagen 1 de 2 LG G3 Vigor Headphone Jack Replacement, Front Facing Camera: paso 7, imagen 2 de 2
    • Use the spudger to gently unplug the ribbon cable connected to the motherboard.

    • Remove the front camera.

  8. LG G3 Vigor Headphone Jack Replacement, Motherboard: paso 8, imagen 1 de 1
    • Use the flat edge of a spudger to disconnect the motherboard ribbon connector.

  9. LG G3 Vigor Headphone Jack Replacement: paso 9, imagen 1 de 2 LG G3 Vigor Headphone Jack Replacement: paso 9, imagen 2 de 2
    • Use the pointed end of a spudger to push back the two motherboard retaining flaps.

    • The motherboard should now be able to be lifted out of the device.

  10. LG G3 Vigor Headphone Jack Replacement, Headphone Jack: paso 10, imagen 1 de 1
    • Remove the headphone jack by inserting the spudger into the jack and pulling it up and out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Geoff Wacker

Miembro Desde 09/30/13

89,996 Reputación

89 Guías creadas

Un comentario

Works also with D855. There are only a view differences, e.g. screws and a minimal different motherboarddesign.

flux - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 3

Todo El Tiempo: 454