Saltar al contenido principal

Introducción

Use this guide to replace the rear case on your LG G Watch.

Partes

No se especificaron partes.

  1. LG G Watch Rear Case Replacement, Wristband: paso 1, imagen 1 de 1
    • Spring bars attach the two halves of the wristband to the watch body. The spring bar has a shoulder on either end.

    • Be prepared to apply some pressure with your fingers to perform the following action.

    • First, slide the wristband down on the spring bar to expose the shoulder of the spring bar.

    • Grasp the exposed shoulder with the tweezers to perform the next step.

  2. LG G Watch Rear Case Replacement: paso 2, imagen 1 de 2 LG G Watch Rear Case Replacement: paso 2, imagen 2 de 2
    • This is a challenging step. Do it carefully to prevent the spring bar from flying out of the wristband.

    • Use the tweezer to depress the spring bar so that it collapses by a few millimeters and pops out of the hole that was holding it in place.

    • Now carefully pull the other end of the spring bar to detach the wristband from the watch face.

    • Repeat steps 1 and 2 for the other wristband.

  3. LG G Watch Rear Case Replacement, Rear Case: paso 3, imagen 1 de 1
    • Use the T5 Torx screwdriver to unscrew the four silver 2mm x 3mm T5 screws that hold the back cover in place.

  4. LG G Watch Rear Case Replacement: paso 4, imagen 1 de 2 LG G Watch Rear Case Replacement: paso 4, imagen 2 de 2
    • Slide the opening pick between the rear case and the rest of the device to separate the two halves.

    • Gently pull the two halves apart.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Geoff Wacker

Miembro Desde 30/09/13

87,124 Reputación

89 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 830