Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
-
Inserta una herramienta de apertura de plástico entre el panel plástico como se muestra en el dispositivo.
-
Usa la herramienta para hacer palanca en el plástico.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use an aluminum driver with Phillips head #00 to remove the four 3 mm screws shown in the picture.
-
Use the same driver to remove the two 2.5 mm screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the tweezers, undo the attached clip.
-
Remove the three 3 mm screws holding down the rest of the antenna with an aluminum driver and the Phillips #00 head.
-
You should now be able to simply take the WiFi bar off of the device.
-
Un comentario
Re Kindle Voyage Wifi Antenna Replacement guide: I cannot find the WiFi antenna bar on your website to purchase a replacement. Do you sell it?