Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Kenmore 110 Series Washing Machine Water Pump Replacement

Qué necesitas

  1. Kenmore 110 Series Washing Machine Water Pump Replacement, Water Pump: paso 1, imagen 1 de 1
    • Unplug the washing machine!

    • Carefully lay washing machine on its back.

  2. Kenmore 110 Series Washing Machine Water Pump Replacement: paso 2, imagen 1 de 3 Kenmore 110 Series Washing Machine Water Pump Replacement: paso 2, imagen 2 de 3 Kenmore 110 Series Washing Machine Water Pump Replacement: paso 2, imagen 3 de 3
    • Carefully remove both wire harnesses connected to the pump.

    • Squeeze and pull back hose clamp.

    • Twist drain hose off of pump.

    • Using a 1/4" socket wrench, remove the three mounting screws.

    • Pull the pump out of place.

    • Pulling the pump away takes a little force.

Conclusión

To reassemble your device, follow these instructions in reverse order.

14 personas más completaron esta guía.

Robert Trout

Miembro Desde 09/26/12

1,234 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 15-43, Forte Fall 2012 Miembro de Cal Poly, Team 15-43, Forte Fall 2012

CPSU-FORTE-F12S15G43

5 Miembros

11 Guías creadas

9 comentarios

please provide info on how to test the water pump once it's removed...

Oscar Ramos - Contestar

The instructions say nothing of the pulley belt and wheel.

I'm looking to work on a 110. 81080100

and

I have read that transmission fluid leaks out when the washer is on its side.

Is there a way to temporarily plug it?

thomas - Contestar

My clothes are still really wet.

Tracy Schultz - Contestar

Washer doesn't move doesn't do any thing it just hummus won't drain water

Hector Rios - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 13

Ultimos 7 días: 77

Ultimos 30 días: 344

Todo El Tiempo: 58,783