Repara tus cosas Comunidad Tienda

JBL Flip 3 USB Chip Replacement

Qué necesitas

  1. JBL Flip 3 USB Chip Replacement, USB Chip: paso 1, imagen 1 de 1

    • Remove plastic outer housing using hands or a standard spudger.

    • Important! Note the three alignment pins on the inner part of the housing. When reassembling, take special care to line these up and insert the pins into the receivers on the chassis prior to snapping the edges into place.

    Traducir

  2. JBL Flip 3 USB Chip Replacement: paso 2, imagen 1 de 1

    • Carefully remove outer frame to expose the inner components of the speaker.

    Traducir

  3. JBL Flip 3 USB Chip Replacement: paso 3, imagen 1 de 1

    • loosen the screws to remove the outer frame

    Traducir

  5. JBL Flip 3 USB Chip Replacement: paso 4, imagen 1 de 1

    • Remove the 8 8.9mm Phillips #00 screws to unfasten the side passive drivers. Set the screws and side passive drivers aside safely.

    Traducir

  6. JBL Flip 3 USB Chip Replacement: paso 5, imagen 1 de 1
    Traducir

  7. JBL Flip 3 USB Chip Replacement: paso 6, imagen 1 de 2 JBL Flip 3 USB Chip Replacement: paso 6, imagen 2 de 2

    • Remove the 3 pin connector from the USB chip.

    Traducir

  8. JBL Flip 3 USB Chip Replacement: paso 7, imagen 1 de 1

    • remove screws to expose usb port

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

49 personas más completaron esta guía.

Autor

con 5 otros colaboradores

College Student

Miembro Desde 02/22/17

3,455 Reputación

4 Guías creadas

Insignias: 13

+ 10 más insignias

Equipo

USF Tampa, Team S1-G2, Leahy Spring 2017 Miembro de USF Tampa, Team S1-G2, Leahy Spring 2017

USFT-LEAHY-S17S1G2

5 Miembros

17 Guías creadas

21 comentarios

how can i find the part..email me at leedeen2000@yahoo.com plz

leedeen2000 - Contestar

I feel that the difficulty is just because of the lack of detail on the instructions. I also need to find the part, but where do I get it? I searched on eBay, Amazon and got nothing. That means that I have to scavenge this part from another one?

rodri.mendoza.t - Contestar

i already got step 5, but i need know how i can get the replacement ? Any idea ?

PabloM - Contestar

Looking for the part 2…

Daniel Brockbank - Contestar

Looking for the same thing…

Daniel Brockbank - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 63

Ultimos 30 días: 274

Todo El Tiempo: 60,449