Saltar al contenido principal

JBL Flip 3 Front Active Driver Replacement

Qué necesitas

  1. JBL Flip 3 Front Active Driver Replacement, Front Active Driver: paso 1, imagen 1 de 1
    • Remove plastic outer housing using hands or a standard spudger.

  2. JBL Flip 3 Front Active Driver Replacement: paso 2, imagen 1 de 1
    • Using your hands, carefully remove outer housing and frame to expose the internal workings of the speaker.

  3. JBL Flip 3 Front Active Driver Replacement: paso 3, imagen 1 de 1
    • Remove the 8.9mm Phillips #00 screws on each corner of the driver to be replaced. There are four screws per driver. Be sure to set the screws somewhere safe to ensure they aren’t lost.

  4. JBL Flip 3 Front Active Driver Replacement: paso 4, imagen 1 de 1
    • Remove the 3-pin connector from motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

15 personas más completaron esta guía.

College Student

Miembro Desde 02/22/17

3,431 Reputación

4 Guías creadas

Equipo

USF Tampa, Team S1-G2, Leahy Spring 2017 Miembro de USF Tampa, Team S1-G2, Leahy Spring 2017

USFT-LEAHY-S17S1G2

5 Miembros

17 Guías creadas

7 comentarios

where did you source the drivers from?

Rashid Saad Siddiqui - Contestar

hi my flip 3 1 speaker is have give the problem thats not give the clear voice , so i want to change the parts can u help me i am where to buy this parts

manu - Contestar

I too want to know where you can buy new drivers. Can't find them online so far...

Johannes - Contestar

i need help getting the front speakers only where would i get them???

brian ortiz - Contestar

Sir

my flip 3 Both speaker is have give the problem thats not give the clear voice , so i want to change the parts can u help me i am where to buy this parts

Anil Kumar Hembrom - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 21

Ultimos 30 días: 103

Todo El Tiempo: 19,110