Saltar al contenido principal

India Mark III Access Door Replacement

Qué necesitas

  1. India Mark III Access Door Replacement, Access Door: paso 1, imagen 1 de 2 India Mark III Access Door Replacement, Access Door: paso 1, imagen 2 de 2
    • Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.

    • Remove the hex head bolt from the top of the access door on the pump head.

    • On reassembly, this bolt should be hand-tight.

  2. India Mark III Access Door Replacement: paso 2, imagen 1 de 3 India Mark III Access Door Replacement: paso 2, imagen 2 de 3 India Mark III Access Door Replacement: paso 2, imagen 3 de 3
    • Pull the access door straight up off the pump head.

    • Store the access door in a sanitary place to prevent contamination.

  3. India Mark III Access Door Replacement: paso 3, imagen 1 de 2 India Mark III Access Door Replacement: paso 3, imagen 2 de 2
    • The access door has a tongue that fits into the base of the pump head.

    • The access door makes a convenient tray to hold nuts and bolts during the disassembly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Equipo

iFixit Miembro de iFixit

Staff

136 Miembros

17,299 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 16

Todo El Tiempo: 230