Introducción
Use this guide to open your TicWatchPro for repairs.
Qué necesitas
-
-
Before starting repairs, take your watch off the charger and power it down.
-
Remove the four 3.9 mm-long Torx T3 screws.
-
-
-
Carefully lift the back cover by the watch crown edge and swing it open to an upward position.
-
-
-
-
Use the flat end of a spudger to pry up and disconnect the sensor flex cable.
-
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Check out our Answers community for help.
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Check out our Answers community for help.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
