Saltar al contenido principal

Herramientas

  1. Shoe polish can be used to visualize the scratches. Rub a small amount of dark shoe polish over the scratch.
    • Shoe polish can be used to visualize the scratches. Rub a small amount of dark shoe polish over the scratch.

  2. Wipe the shoe polish over the panel. This fills the scratches with polish.
    • Wipe the shoe polish over the panel. This fills the scratches with polish.

  3. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  4. Block sand the panel with 2000-grit wet/dry sandpaper and plenty of water. Sand until the shoe polish disappears.
    • Block sand the panel with 2000-grit wet/dry sandpaper and plenty of water. Sand until the shoe polish disappears.

  5. Polish out the sanding scratches with rubbing compound.
    • Polish out the sanding scratches with rubbing compound.

  6. A polishing wheel makes short work of bringing the shine back. An oscillating polisher is less aggressive than this rotary polisher.
    • A polishing wheel makes short work of bringing the shine back. An oscillating polisher is less aggressive than this rotary polisher.

    • Don't buff through the paint into the next layer, especially on high-crown or sharp edges.

  7. Finish with light hand buffing to remove the last of the compound. Follow with car wax.
    • Finish with light hand buffing to remove the last of the compound. Follow with car wax.

Linea de Meta

17 personas más completaron esta guía.

Brian Sallee

Miembro Desde 07/03/12

1,760 Reputación

1 Guía escrita

Equipo

iFixit Miembro de iFixit

Community

101 Miembros

8,734 Guías creadas

Don’t you need to put the clear coat on the paint before waxing?

Richard E Riman - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 7

Últimos 7 Días: 20

Últimos 30 Días: 57

Todo El Tiempo: 7,599