Repara tus cosas Comunidad Tienda

How to Assemble the iMac Cardboard Service Wedge

Escrito Por: Craig Lloyd (y otro participante)
  • Comentarios: 2
  • Favoritos: 1
  • Terminaciones: 26

Dificultad

Muy fácil

Pasos

5

Tiempo Requerido

1 - 2 minutos

Secciones

1

Banderas

0

Introducción

Follow this guide to assemble the iMac Cardboard Service Wedge, which ships unfolded and flat. Once assembled, this product is not designed to be unfolded.

  1. With the blank side facing you, fold the two tabs inward at a 90-degree angle. With the blank side facing you, fold the two tabs inward at a 90-degree angle. With the blank side facing you, fold the two tabs inward at a 90-degree angle.

    • With the blank side facing you, fold the two tabs inward at a 90-degree angle.

    Traducir

  2. Fold the two outer side flaps inward at a 90-degree angle. Fold the two outer side flaps inward at a 90-degree angle.

    • Fold the two outer side flaps inward at a 90-degree angle.

    Traducir

  4. Fold the two halves together, using the crease in the center as the folding point. Overlap the two outer side flaps, making sure the flap with the two small tabs is on top. Overlap the two outer side flaps, making sure the flap with the two small tabs is on top.

    • Fold the two halves together, using the crease in the center as the folding point.

    • Overlap the two outer side flaps, making sure the flap with the two small tabs is on top.

    Traducir

  5. Insert the two tabs into the slots along the fold. Make sure the flared edges on either side of the tabs are inserted completely into the slots so that they lock in place and don't slide out. Make sure the flared edges on either side of the tabs are inserted completely into the slots so that they lock in place and don't slide out.

    • Insert the two tabs into the slots along the fold.

    • Make sure the flared edges on either side of the tabs are inserted completely into the slots so that they lock in place and don't slide out.

    Traducir

  6. Your iMac Cardboard Service Wedge is ready to go! Insert the Service Wedge under the iMac's display to hold it in place while you perform repairs on your iMac.

    • Your iMac Cardboard Service Wedge is ready to go!

    • Insert the Service Wedge under the iMac's display to hold it in place while you perform repairs on your iMac.

    Traducir
Linea de Meta

26 personas más completaron esta guía.

Autor

con 1 otro colaborador

Craig Lloyd

Miembro Desde 10/02/16

23,283 Reputación

82 Guías creadas

Insignias: 41

+ 38 más insignias

Equipo

iFixit Miembro de iFixit

Community

146 Miembros

17,283 Guías creadas

Un Comentario

Nice explanation, however, the cardboard stand is available in the US and not here and so it the dual HD cable for the iMac Intel 27” (mid 2011).

No good posting a great helps tory if the parts are not sold in Australia.

Hank Doll - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 11

Ultimos 7 días: 51

Ultimos 30 días: 250

Todo El Tiempo: 4,850