Saltar al contenido principal

Introducción

This guide will walk you through how to replace a faulty or non-functional throttle or brake lever on a Hover-1 Eagle scooter. You should replace your throttle or brake lever if your lever fails to accelerate or stop the scooter or appears damaged. To determine if you need to replace your throttle or brake lever, refer to our Troubleshooting Guide.

  1. Unscrew the scooter handle. The scooter handles are left-handed or reverse threaded, so twist clockwise to remove them. The scooter handles are left-handed or reverse threaded, so twist clockwise to remove them.
    • Unscrew the scooter handle.

    • The scooter handles are left-handed or reverse threaded, so twist clockwise to remove them.

  2. Push back the fastening clips by wedging the plastic spudger between the clip and the throttle handle. Insert iFixit opening picks between each fastening clip and the throttle handle to prevent re-fastening. Pull the throttle lever off gently by pulling towards you.
    • Push back the fastening clips by wedging the plastic spudger between the clip and the throttle handle.

    • Insert iFixit opening picks between each fastening clip and the throttle handle to prevent re-fastening.

    • Pull the throttle lever off gently by pulling towards you.

    • The spring housed in the handle can sometimes send the lever flying. Maintain a firm grip on the throttle lever.

  3. To reassemble, insert the spring into the placement hole, housed inside the throttle handle. Insert the other end of the spring into the placement hole inside the throttle body housing. To reassemble, insert the spring into the placement hole, housed inside the throttle handle. Insert the other end of the spring into the placement hole inside the throttle body housing. To reassemble, insert the spring into the placement hole, housed inside the throttle handle. Insert the other end of the spring into the placement hole inside the throttle body housing.
    • To reassemble, insert the spring into the placement hole, housed inside the throttle handle. Insert the other end of the spring into the placement hole inside the throttle body housing.

  4. Twist the throttle lever back to its original orientation by rotating it to the left. Apply pressure to the throttle handle until you hear the fastening clips take hold the of the throttle lever. Make sure the throttle lever is fully inserted and flush with the display throttle body.
    • Twist the throttle lever back to its original orientation by rotating it to the left.

    • Apply pressure to the throttle handle until you hear the fastening clips take hold the of the throttle lever.

    • Make sure the throttle lever is fully inserted and flush with the display throttle body.

  5. Reattach the scooter handle. Make sure to twist the handles counterclockwise to tighten. Make sure to twist the handles counterclockwise to tighten.
    • Reattach the scooter handle.

    • Make sure to twist the handles counterclockwise to tighten.

Linea de Meta

Una persona más ha completado esta guía.

Andrew Gaskell

Miembro Desde 23/01/20

702 Reputación

5 Guías creadas

Equipo

Cal Poly, Team S1-G2, White Winter 2020 Miembro de Cal Poly, Team S1-G2, White Winter 2020

CPSU-WHITE-W20S1G2

4 Miembros

5 Guías creadas

9 comentarios

Great detail……….. Where can I buy the replacement part (throttle) the company hover1 isn't answering me and they don't have this part on their website. Thanks

hanjna76 - Contestar

Im needed a throttle did anyone have any luck?

rodarte_amanda1992 -

Where do I buy the part where do I get it please let me know The brake lever

poorbubbaa - Contestar

Necesito acelerador y no lo encuentro.

Josue Villanueva - Contestar

I cant squeeze the spudger and the pick between this and the spudger broke…what the!!!

Cheri Rael - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 16

Ultimos 7 días: 72

Ultimos 30 días: 330

Todo El Tiempo: 6,147