Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Hot Wheels AI Intelligent Race System Controller Buttons Replacement

Qué necesitas

  1. Hot Wheels AI Intelligent Race System Controller Buttons Replacement, Controller Buttons: paso 1, imagen 1 de 1
    • Remove the six screws located on the back of the controller using a #J1 JIS head screwdriver.

  2. Hot Wheels AI Intelligent Race System Controller Buttons Replacement: paso 2, imagen 1 de 1
    • Pop the front of the controller casing from the back and carefully lay the controller out with circuits exposed.

  3. Hot Wheels AI Intelligent Race System Controller Buttons Replacement: paso 3, imagen 1 de 2 Hot Wheels AI Intelligent Race System Controller Buttons Replacement: paso 3, imagen 2 de 2
    • Locate controller buttons at the top of the controller. They are blue and red. Check for debris that may be jamming buttons or broken buttons.

  4. Hot Wheels AI Intelligent Race System Controller Buttons Replacement: paso 4, imagen 1 de 2 Hot Wheels AI Intelligent Race System Controller Buttons Replacement: paso 4, imagen 2 de 2
    • If buttons are jammed or broken easily remove them by snapping them up and out of place. Replace buttons with new ones or clear debris and clean buttons.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 5

Todo El Tiempo: 274