Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the six screws located on the back of the controller using a #J1 JIS head screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pop the front of the controller casing from the back and carefully lay the controller out with circuits exposed.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate controller buttons at the top of the controller. They are blue and red. Check for debris that may be jamming buttons or broken buttons.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
If buttons are jammed or broken easily remove them by snapping them up and out of place. Replace buttons with new ones or clear debris and clean buttons.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.