Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip your amp over to begin removing the plastic cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the four corner screws using a phillips #0 screw driver to remove the back cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the back cover by carefully pushing the battery connector through the hole in the cover.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
With the phillips #0 screwdriver, unscrew the two white plastic clips that hold the speaker in place.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use flush wire cutters to remove black and red wires from the old speaker.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Connect the new speaker by soldering the black and red wires to the negative and positive connections respectively
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Connect the battery and turn the power on to test proper connection of the new speaker.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Connect the amp to your favorite instrument and test out the new sound!
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.