Repara tus cosas Comunidad Tienda

Honda EU2200IT A2 Air Filters Replacement

Introducción

This guide shows how to remove and replace the air filters on the Honda EU2200IT generator.

Qué necesitas

  1. Honda EU2200IT A2 Air Filters Replacement, Honda EU2200IT A2 Safety Precautions: paso 1, imagen 1 de 1

    • Before you begin, make sure the generator is switched off and the generator is cool to the touch.

    Editar

  2. Honda EU2200IT A2 Air Filters Replacement, Disconnect the spark plug: paso 2, imagen 1 de 2 Honda EU2200IT A2 Air Filters Replacement, Disconnect the spark plug: paso 2, imagen 2 de 2

    • Lift and remove the spark plug cover.

    Editar

  3. Honda EU2200IT A2 Air Filters Replacement: paso 3, imagen 1 de 2 Honda EU2200IT A2 Air Filters Replacement: paso 3, imagen 2 de 2

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

    Editar

  5. Honda EU2200IT A2 Air Filters Replacement, Remove the maintenance cover: paso 4, imagen 1 de 1

    • Use a Phillips #2 screwdriver to loosen the screw holding the maintenance cover in place.

    Editar

  6. Honda EU2200IT A2 Air Filters Replacement: paso 5, imagen 1 de 3 Honda EU2200IT A2 Air Filters Replacement: paso 5, imagen 2 de 3 Honda EU2200IT A2 Air Filters Replacement: paso 5, imagen 3 de 3

    • Swing the top of the maintenance cover out.

    • Remove the maintenance cover.

    Editar

  7. Honda EU2200IT A2 Air Filters Replacement, Remove the air filters: paso 6, imagen 1 de 1

    • Remove the Phillips screw securing the filter cover.

    • During reassembly, be sure to tighten the screw to at least 1.7 ft-lb to prevent it from loosening during operation.

    Editar

  8. Honda EU2200IT A2 Air Filters Replacement: paso 7, imagen 1 de 2 Honda EU2200IT A2 Air Filters Replacement: paso 7, imagen 2 de 2

    • Remove the filter cover.

    Editar

  9. Honda EU2200IT A2 Air Filters Replacement: paso 8, imagen 1 de 2 Honda EU2200IT A2 Air Filters Replacement: paso 8, imagen 2 de 2

    • Remove the air filters from the filter box.

    • To clean the filters:

    • Clean the filters in warm soapy water.

    • Allow the filters to dry thoroughly.

    • Dip the filters in clean engine oil, and squeeze out any excess oil.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

Arthur Shi

Miembro Desde 01/03/18

254,546 Reputación

529 Guías creadas

Insignias: 47

+ 44 más insignias

Equipo

iFixit Miembro de iFixit

Staff

136 Miembros

17,411 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 3

Ultimos 30 días: 15

Todo El Tiempo: 329