Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Use this guide to remove and replace the facerest on an HTC Vive.

  1. Be sure to power down and disconnect your Vive before beginning. Use a T5 Torx driver to remove the two 12 mm-long screws securing the head strap mounts on either side of the headset.
    • Be sure to power down and disconnect your Vive before beginning.

    • Use a T5 Torx driver to remove the two 12 mm-long screws securing the head strap mounts on either side of the headset.

    • The mounts may fall off when the screws are removed, so be careful not to lose any parts.

  2. Remove both head strap mounts. Remove both head strap mounts. Remove both head strap mounts.
    • Remove both head strap mounts.

  3. Slide the facerest straight away from the headset to remove it. Slide the facerest straight away from the headset to remove it.
    • Slide the facerest straight away from the headset to remove it.

Conclusión

Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Answers community for troubleshooting help.

3 personas más completaron esta guía.

Adam O'Camb

Miembro Desde 11/04/15

131,046 Reputación

378 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

133 Miembros

15,614 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 6

Ultimos 30 días: 21

Todo El Tiempo: 743