Repara tus cosas Comunidad Tienda

HP x2 10-p010wm Speaker Replacement

Introducción

Model Number : HP x2 10-p010wm

If sound is not coming out of your device or the sound is distorted, it is a sign that you need to replace your speakers

This guide will show you how to take apart the screen in order to access to its speakers. But we recommend you to check our troubleshooting page.

Qué necesitas

  1. HP x2 10-p010wm Speaker Replacement, Battery: paso 1, imagen 1 de 1

    • Pull the screen away from the keyboard.

    Editar

  2. HP x2 10-p010wm Speaker Replacement: paso 2, imagen 1 de 2 HP x2 10-p010wm Speaker Replacement: paso 2, imagen 2 de 2

    • Insert a spudger into the space between the screen and computer and gently pry the two pieces apart. Continue this around the whole screen.

    Editar

  3. HP x2 10-p010wm Speaker Replacement: paso 3, imagen 1 de 1

    • Slowly disconnect the thin wire attaching the screen to the rest of the computer by holding one end and sliding it down.

    • Do not pull up too hard; slowly slide it towards the screen.

    Editar

  5. HP x2 10-p010wm Speaker Replacement: paso 4, imagen 1 de 1

    • Remove the eight 4mm Phillips #00 screws from the metal plate.

    Editar

  6. HP x2 10-p010wm Speaker Replacement: paso 5, imagen 1 de 3 HP x2 10-p010wm Speaker Replacement: paso 5, imagen 2 de 3 HP x2 10-p010wm Speaker Replacement: paso 5, imagen 3 de 3

    • Slowly peel up any tape securing the wire to the metal cover.

    • Remove the metal cover to access the battery.

    Editar

  7. HP x2 10-p010wm Speaker Replacement: paso 6, imagen 1 de 1

    • Remove the 4mm screw on the side.

    Editar

  8. HP x2 10-p010wm Speaker Replacement: paso 7, imagen 1 de 1

    • Remove the black tape.

    • Pull the battery connector towards the battery to disconnect it from its socket.

    Editar

  9. HP x2 10-p010wm Speaker Replacement: paso 8, imagen 1 de 1

    • Remove the battery.

    Editar

  10. HP x2 10-p010wm Speaker Replacement, Speaker: paso 9, imagen 1 de 2 HP x2 10-p010wm Speaker Replacement, Speaker: paso 9, imagen 2 de 2

    • Remove speakers on both sides.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 2 otros colaboradores

Nathan Ojala

Miembro Desde 10/30/19

317 Reputación

2 Guías creadas

Insignias: 5

+ 2 más insignias

Equipo

UMass Dartmouth, Team S4-G3, Saloman Fall 2019 Miembro de UMass Dartmouth, Team S4-G3, Saloman Fall 2019

UMASSD-SALOMAN-F19S4G3

3 Miembros

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 8

Todo El Tiempo: 194