Saltar al contenido principal

Introducción

The HP Media Center 876x is capable of receiving television service through its TV tuner card. If you are unable to receive proper service, the TV tuner card may require replacement.

Partes

No se especificaron partes.

  1. Remove the two (9 mm) hand screws on the back panel. Remove the two (9 mm) hand screws on the back panel.
    • Remove the two (9 mm) hand screws on the back panel.

  2. Place the tower on its side. Slide the side panel horizontally to detach, and pull upward to remove. Slide the side panel horizontally to detach, and pull upward to remove.
    • Place the tower on its side.

    • Slide the side panel horizontally to detach, and pull upward to remove.

  3. Identify the TV tuner card (distal from the cooling fan, in the lower-left corner of the tower). Using a  #0 Phillips head screwdriver, remove the one (6 mm) screw fastening the TV tuner card into its slot.
    • Identify the TV tuner card (distal from the cooling fan, in the lower-left corner of the tower).

    • Using a #0 Phillips head screwdriver, remove the one (6 mm) screw fastening the TV tuner card into its slot.

  4. Gently pull the card vertically out of its port. Gently pull the card vertically out of its port.
    • Gently pull the card vertically out of its port.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

Clemson, Team 6-1, Benson Spring 2014 Miembro de Clemson, Team 6-1, Benson Spring 2014

CLEM-BENSON-S14S6G1

3 Miembros

15 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 8

Todo El Tiempo: 443