Saltar al contenido principal

Introducción

Replace the formatter in an HP LaserJet 1160 or 1320.

  1. Pull on the two tabs on the back of the printer to release the left side cover. Remove the cover by rotating it towards the front of the printer. Remove the cover by rotating it towards the front of the printer.
    • Pull on the two tabs on the back of the printer to release the left side cover.

    • Remove the cover by rotating it towards the front of the printer.

  2. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  3. Remove 2 screws on the I/O port cover. Remove 6 screws on the formatter. Disconnect 3 connectors from the formatter.
    • Remove 2 screws on the I/O port cover.

    • Remove 6 screws on the formatter.

    • Disconnect 3 connectors from the formatter.

    • Disconnect 2 flat flexible cables from the formatter.

    • Remove the formatter from the printer.

    • Be careful not to fold, crease, or tear flat flexible cables.

    • The I/O port cover will need to be transferred to the new formatter before installing it.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

jrw01

Miembro Desde 22/08/13

1,125 Reputación

23 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 9

Todo El Tiempo: 761