HP Envy TouchSmart 15 Wireless Adapter Replacement

Introducción

You may need to replace the wireless adapter if your computer can't connect to any wireless network. Be sure that you do not break the antenna connector wires.

Qué necesitas

Paso 1 Battery

HP Envy TouchSmart 15 Wireless Adapter Replacement, Battery: paso 1, imagen 1 de 1

Press the battery release tab and the battery will pop up.

Traducir

Paso 2

Remove the battery from the laptop, it will come out easily.

Traducir

Paso 3 Accessory Plate

HP Envy TouchSmart 15 Wireless Adapter Replacement, Accessory Plate: paso 3, imagen 1 de 2

HP Envy TouchSmart 15 Wireless Adapter Replacement, Accessory Plate: paso 3, imagen 2 de 2

Remove the single screw holding the accessory plate. This is a PH0 2.0x2.5 screw.

Traducir

Paso 4

HP Envy TouchSmart 15 Wireless Adapter Replacement: paso 4, imagen 3 de 3

Pry the accessory plate up from the back of the laptop by applying force upwards where the screw was removed.

Traducir

Paso 5 Wireless Adapter

HP Envy TouchSmart 15 Wireless Adapter Replacement, Wireless Adapter: paso 5, imagen 1 de 2

HP Envy TouchSmart 15 Wireless Adapter Replacement, Wireless Adapter: paso 5, imagen 2 de 2

Remove the screw with PH 0 screwdriver that is holding the wireless adapter in. This is PM 2.0x2.5 screws.

Traducir

Paso 6

HP Envy TouchSmart 15 Wireless Adapter Replacement: paso 6, imagen 3 de 3

Hold the wireless adapter and gently remove the white and black wires from it. The connectors will come out straight up.

Traducir

Today I open my laptop to clean up a bit of dust. and by mistakenly I break black connector. not the thing is that the connector part from wireless card stuck inside black cable. but i can still use wifi without any problem. my question is " Is there any affect on my laptop if i leave it like this ?" and another question what is the functioning of that black cable ?

hope I will get reply soon.please reply me on ronak.r.30588@gmail.com

Thank you

Ronak

Ronnie M - 16 de nov. de 2016 Contestar