Saltar al contenido principal

General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement

Qué necesitas

  1. General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement, Motor Assembly: paso 1, imagen 1 de 1
    • Before you begin, make sure the drain cleaner is disconnected from power.

    • Loosen the belt guard knob enough to be able to slide the belt guard toward the front of the drain cleaner.

  2. General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement: paso 2, imagen 1 de 1
    • Slide the belt guard toward the front of the drain cleaner and off of the motor.

  3. General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement: paso 3, imagen 1 de 3 General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement: paso 3, imagen 2 de 3 General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement: paso 3, imagen 3 de 3
    • Push down on the motor to take tension off of the belt.

    • The motor mount is spring-loaded to keep tension on the belt.

    • Lift the belt off of the motor pulley and remove it from the motor.

  4. General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement: paso 4, imagen 1 de 2 General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement: paso 4, imagen 2 de 2
    • Use two 1/2 inch wrenches to remove the four nut and bolt sets securing the motor to the drain cleaner.

    • During reassembly, make sure that the belt pulley on the motor is lined up with the belt groove on the cage before tightening the bolts.

  5. General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement: paso 5, imagen 1 de 1
    • Remove the motor assembly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Adam O'Camb

Miembro Desde 04/11/15

197,118 Reputación

416 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 9

Ultimos 30 días: 47

Todo El Tiempo: 2,029