Repara tus cosas Comunidad Tienda

Frigidaire Side-By-Side Refrigerator Rear Cover Removal

Introducción

The rear cover provides access to the compressor, condenser, condenser fans, and solenoid water valve.

Qué necesitas

  1. Frigidaire Side-By-Side Refrigerator Rear Cover Removal, Unfasten the rear cover: paso 1, imagen 1 de 1

    • Use a 1/4" nut driver to remove the four screws securing the rear cover to the refrigerator.

    Editar

  3. Frigidaire Side-By-Side Refrigerator Rear Cover Removal, Lift up the rear cover: paso 2, imagen 1 de 3 Frigidaire Side-By-Side Refrigerator Rear Cover Removal, Lift up the rear cover: paso 2, imagen 2 de 3 Frigidaire Side-By-Side Refrigerator Rear Cover Removal, Lift up the rear cover: paso 2, imagen 3 de 3

    • Lift the rear cover until it is free of the tabs.

    • If your water supply line is in use, turn the supply valve off, and disconnect it at the connection on the refrigerator.

    • If the water supply hose is not used, pass it through the hole in the cover.

    Editar

  4. Frigidaire Side-By-Side Refrigerator Rear Cover Removal, Remove the cover: paso 3, imagen 1 de 1

    • Remove the cover and set it aside.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our  Answers community for help.

Autor

con 1 otro colaborador

Bill Gilbert

Miembro Desde 06/30/22

37,413 Reputación

261 Guías creadas

Insignias: 32

+ 29 más insignias

Equipo

iFixit Miembro de iFixit

Staff

118 Miembros

19,416 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 6

Ultimos 30 días: 22

Todo El Tiempo: 112