Skip to main content

Introducción

A common problem on the Canon EOS A2 is for the pop up flash mechanism to get stuck and not "pop-up". This is caused by the camera fooling itself into thinking an external flash is installed, which interferes with the main flash.

Partes

No se especificaron partes.

  1. Locate the battery door/camera grip on the left side of the camera and lift the rotating removal tab.
    • Locate the battery door/camera grip on the left side of the camera and lift the rotating removal tab.

  2. Twist the tab clockwise to unlock the door, then pull outward from the camera to remove it.
    • Twist the tab clockwise to unlock the door, then pull outward from the camera to remove it.

  3. Remove the battery from inside the battery housing and set the cover aside.
    • Remove the battery from inside the battery housing and set the cover aside.

  4. Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora

    Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora
  5. The inside of the flash shoe has a removable cover which is just snapped in place. Using the flathead screwdriver, pry up on the front end of the cover.
    • The inside of the flash shoe has a removable cover which is just snapped in place.

    • Using the flathead screwdriver, pry up on the front end of the cover.

    • Warning: The cover is on tight and is tough to pry off.

  6. Loosen, but do not remove, the 4 screws on top of the flash shoe.
    • Loosen, but do not remove, the 4 screws on top of the flash shoe.

  7. Locate the black pludger sticking up out of the flash shoe.
    • Locate the black pludger sticking up out of the flash shoe.

    • The black pludger may not be visible, which is why the flash is broken. Just locate the hole to where it should be and move on to the next step.

  8. Push a paperclip in and out of the plunger hole, ensuring the plunger moves up and down freely.
    • Push a paperclip in and out of the plunger hole, ensuring the plunger moves up and down freely.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Mark

Miembro Desde 20/04/11

98 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 8-9, Regan Spring 2011 Miembro de Cal Poly, Team 8-9, Regan Spring 2011

CPSU-REGAN-S11S8G9

4 Miembros

6 Guías creadas

Añadir comentario

Ver Estadísticas:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 15

Global: 2,595