Introducción
This is a quick replacement guide for a brush roller on an Eureka SuctionSeal Pet vacuum. It is common for the roller to accumulate debris, this troubleshooting guide should help. If the roller is jammed or damaged follow this guide's steps.
Qué necesitas
-
-
Remove the three 19 mm screws on the bottom of the head with a Phillips #2 screw driver.
-
Pull on the yellow sole plate to remove.
-
-
Casi Terminas!
To reassemble your device, follow these instructions in reverse order.
Conclusión
To reassemble your device, follow these instructions in reverse order.
Equipo
Cuesta, Team 60-2, Krynen Fall 2024 Miembro de Cuesta, Team 60-2, Krynen Fall 2024
CUESTA-KRYNEN-F24S60G2
Miembros de 4
5 Guías creadas
