Repara tus cosas Comunidad Tienda

Epson Powerlite 410W Top Cover Replacement

Qué necesitas

  1. Epson Powerlite 410W Top Cover Replacement, Top Cover: paso 1, imagen 1 de 1

    • Press the power button located on top of the projector.

    • Remember to let the projector cool off completely after turning off the power before beginning the repair.

    Editar

  3. Epson Powerlite 410W Top Cover Replacement: paso 2, imagen 1 de 1

    • Remove eight screws from the bottom of the device using a Phillips #00 screwdriver.

    Editar

  4. Epson Powerlite 410W Top Cover Replacement: paso 3, imagen 1 de 3 Epson Powerlite 410W Top Cover Replacement: paso 3, imagen 2 de 3 Epson Powerlite 410W Top Cover Replacement: paso 3, imagen 3 de 3

    • Turn the projector so the power button is on top.

    • Gently pull up the cover until it pops off.

    • Do not pull too far; a ribbon cable still connects the top cover to the motherboard.

    • Disconnect the ribbon cable that attaches the cover to the motherboard.

    • Remove the cover and place to the side.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

Kristen Gismondi

Miembro Desde 11/12/14

84,493 Reputación

212 Guías creadas

Insignias: 46

+ 43 más insignias

Equipo

iFixit Miembro de iFixit

Staff

141 Miembros

17,801 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 51