Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the four screws (size: 3.175mm) on the left and right side of the Element Electronics GC-1020 device using the PH#0 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully pull the back of the device (the silver portion) apart from the rest of the device.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the bottom of left and right sides of the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully bend the plastic frame to remove the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Detach the screen by disconnecting the thin piece of ribbon cable attached to the PCB (printed circuit board).
-
Use a pair of tweezers to carefully pull the ribbon from the circuit board.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully pry apart the screen from the frame of the device.
-
Separate the two by peeling away the thin plastic layer that makes up the screen of the device.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.