Saltar al contenido principal
Inglés
Español
Paso 3
Detach the screen by disconnecting the thin piece of ribbon cable attached to the PCB (printed circuit board). Use a pair of tweezers to carefully pull the ribbon from the circuit board. Take care not to damage the ribbon, as you will need it intact to reattach your new screen.
  • Detach the screen by disconnecting the thin piece of ribbon cable attached to the PCB (printed circuit board).

  • Use a pair of tweezers to carefully pull the ribbon from the circuit board.

  • Take care not to damage the ribbon, as you will need it intact to reattach your new screen.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.