Saltar al contenido principal

Introducción

iJust 3 is third edition in the series of iJust’s. It’s well known among users all around the world. During using it you can encounter most common problem - putrescent fire button.

Partes

No se especificaron partes.

  1. Specification of iJust 3:
    • Specification of iJust 3:

    • Resistance range: 0.1 Ohm - 3.0 Ohm

    • Battery voltage: 3.7V

    • Max power: 80W

  2. Insert stick into vice (attach it to the top part) and slowly pull up by "tube part" Be carefull! If you will pull it too fast and too strong, you can break away battery
    • Insert stick into vice (attach it to the top part) and slowly pull up by "tube part"

    • Be carefull! If you will pull it too fast and too strong, you can break away battery

  3. Unscrew two screws on the sides of board.
    • Unscrew two screws on the sides of board.

  4. Thats all, thanks for your attention
    • Thats all, thanks for your attention

Linea de Meta

3 personas más completaron esta guía.

Szymon Milewski

Miembro Desde 28/12/20

596 Reputación

3 Guías creadas

It was very helpful, thank you!

kali1902 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 27

Ultimos 30 días: 130

Todo El Tiempo: 614