Repara tus cosas Comunidad Tienda

Ecovacs Deebot 900 Bottom Case Replacement

Introducción

In order to repair any of the internal components of the Ecovacs Deebot 900, the bottom cover must be removed. This will be a required step for repairing anything inside of the robot and must be completed first, so use this guide to open the Ecovacs 900 Deebot.

Qué necesitas

  1. Ecovacs Deebot 900 Bottom Case Replacement, Battery: paso 1, imagen 1 de 1

    • Remove all the brushes from the Deebot.

    Editar

  2. Ecovacs Deebot 900 Bottom Case Replacement: paso 2, imagen 1 de 1

    • Using a Phillips #0 screwdriver, remove the two 12.25 mm screws holding the battery cover in place.​

    Editar

  3. Ecovacs Deebot 900 Bottom Case Replacement: paso 3, imagen 1 de 1

    • Remove the battery cover.

    Editar

  4. Ecovacs Deebot 900 Bottom Case Replacement: paso 4, imagen 1 de 1

    • Using the two white straps on the sides of the battery, gently remove the battery. ​

    • Be careful not to rip out the battery cable.

    Editar

  6. Ecovacs Deebot 900 Bottom Case Replacement: paso 5, imagen 1 de 1

    • Carefully disconnect the battery cable by pulling near the connector at the bottom of the battery compartment.

    Editar

  7. Ecovacs Deebot 900 Bottom Case Replacement, Front Bumper: paso 6, imagen 1 de 2 Ecovacs Deebot 900 Bottom Case Replacement, Front Bumper: paso 6, imagen 2 de 2

    • Using a Phillips #00 screwdriver, remove the eight screws on the bottom edge of the bumper. ​

    Editar

  8. Ecovacs Deebot 900 Bottom Case Replacement: paso 7, imagen 1 de 1

    • Remove the black strip on the bottom of the bumper.

    Editar

  9. Ecovacs Deebot 900 Bottom Case Replacement: paso 8, imagen 1 de 2 Ecovacs Deebot 900 Bottom Case Replacement: paso 8, imagen 2 de 2

    • Carefully lift up the bumper untill it pops out of place.​

    Editar

  10. Ecovacs Deebot 900 Bottom Case Replacement: paso 9, imagen 1 de 2 Ecovacs Deebot 900 Bottom Case Replacement: paso 9, imagen 2 de 2

    • Disconnect the two cables connecting the bumper to the body of the Deebot.

    • Remove the front bumper from the device.

    Editar

  11. Ecovacs Deebot 900 Bottom Case Replacement, Bottom Case: paso 10, imagen 1 de 2 Ecovacs Deebot 900 Bottom Case Replacement, Bottom Case: paso 10, imagen 2 de 2

    • Using a Phillips #00 screwdriver, take out the six screws around the perimeter of the bottom case.

    Editar

  12. Ecovacs Deebot 900 Bottom Case Replacement: paso 11, imagen 1 de 2 Ecovacs Deebot 900 Bottom Case Replacement: paso 11, imagen 2 de 2

    • Insert a Jimmy into the seam and work all the way around the robot.

    • Disconnect the two cables and remove the bottom case from the device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 6

Ultimos 30 días: 26

Todo El Tiempo: 2,286