Echo Power Pruner 254 cc PPT2620 2019 Control Handle Assembly Replacement

Introducción

Use this guide to remove the control handle assembly on an Echo Power Pruner 254 cc PPT2620 2019.

Move the stop switch into the "stop" position to turn the pruner off before attempting any repairs.
Pull the spark plug cap straight off of the spark plug.

Use a T25 Torx screwdriver to loosen (but not remove) the two screws clamping the main pipe assembly to the control handle.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Miembro Desde 04/11/15

196,764 Reputación

416 Guías creadas