Saltar al contenido principal

EK3211 Kitchen Scale Disassembly

Qué necesitas

  1. EK3211 Kitchen Scale Disassembly, Remove label to access screws: paso 1, imagen 1 de 1
    • Peel back the "ELECTRONIC KITCHEN SCALE" label to reveal two screws underneath.

  2. EK3211 Kitchen Scale Disassembly: paso 2, imagen 1 de 1
    • Use a #2 Phillips screwdriver to remove the two screws.

    • These screws are very tight and prone to strip.

  3. EK3211 Kitchen Scale Disassembly: paso 3, imagen 1 de 1
    • Remove the four screws holding the top veneer panel to the base.

  4. EK3211 Kitchen Scale Disassembly: paso 4, imagen 1 de 1
    • Remove the top veneer panel. It should come off without any force.

    • There are two small plastic clips on the edge below the screen, which must be inserted correctly during reassembly.

  5. EK3211 Kitchen Scale Disassembly: paso 5, imagen 1 de 1
    • Remove the screw holding the PCB and screen in place using a #1 Phillips screwdriver.

  6. EK3211 Kitchen Scale Disassembly: paso 6, imagen 1 de 1
    • Remove the PCB and screen assembly.

    • The buttons should also lift up with the rest of the PCB/screen assembly.

  7. EK3211 Kitchen Scale Disassembly: paso 7, imagen 1 de 1
    • Use a #1 Phillips screwdriver to remove the four screws holding the load cell mount to the base.

  8. EK3211 Kitchen Scale Disassembly: paso 8, imagen 1 de 1
    • Remove the two screws holding the load cell to the bracket using a #2 Phillips screwdriver.

  9. EK3211 Kitchen Scale Disassembly: paso 9, imagen 1 de 1
    • Separate the bracket from the load cell.

    • Be careful not to lose the spacer plate.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Steven Bell

Miembro Desde 08/27/20

493 Reputación

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 9

Todo El Tiempo: 267