Saltar al contenido principal

DualShock 4 CHU-ZCT2U Disassembly

Qué necesitas

  1. DualShock 4 CHU-ZCT2U Disassembly, First Screws: paso 1, imagen 1 de 2 DualShock 4 CHU-ZCT2U Disassembly, First Screws: paso 1, imagen 2 de 2
    • All the screws are the same in the controller (Phillips's head).

  2. DualShock 4 CHU-ZCT2U Disassembly, Opening the Case: paso 2, imagen 1 de 1
    • Use a plastic spudger to open the case. Try not to scratch the plastic.

  3. DualShock 4 CHU-ZCT2U Disassembly, Separate the 2 halves: paso 3, imagen 1 de 2 DualShock 4 CHU-ZCT2U Disassembly, Separate the 2 halves: paso 3, imagen 2 de 2
    • Be careful opening the case because there is a ribbon cable holding the 3 halves together.

    • The plastic for the lightbar will look different from mine because it's fragile and it broke.

  4. DualShock 4 CHU-ZCT2U Disassembly, Battery: paso 4, imagen 1 de 2 DualShock 4 CHU-ZCT2U Disassembly, Battery: paso 4, imagen 2 de 2
    • Remove the battery and the screw underneath it.

  5. DualShock 4 CHU-ZCT2U Disassembly, Touchpad Ribbon Cable: paso 5, imagen 1 de 1
    • The ribbon cable slots through the rectangular hole in the plastic beneath.

  6. DualShock 4 CHU-ZCT2U Disassembly, Board: paso 6, imagen 1 de 1
    • Remove the board.

  7. DualShock 4 CHU-ZCT2U Disassembly, You Are Done!: paso 7, imagen 1 de 1
    • You're finished with your DualShock 4 dissasembly!

Conclusión

To reassemble your device, follow these instructions in reverse order. If there are any issues, please tell me as this is my first guide

8 personas más completaron esta guía.

Mintyboi 88

Miembro Desde 04/17/20

316 Reputación

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 13

Ultimos 7 días: 70

Ultimos 30 días: 309

Todo El Tiempo: 11,959