Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Droid Ultra XT1080 Power Button Replacement

Introducción

This guide will show you how to properly replace the power button on your Motorola Droid Ultra XT 1080

Qué necesitas

  1. Droid Ultra XT1080 Power Button Replacement, Power Button: paso 1, imagen 1 de 3 Droid Ultra XT1080 Power Button Replacement, Power Button: paso 1, imagen 2 de 3 Droid Ultra XT1080 Power Button Replacement, Power Button: paso 1, imagen 3 de 3

    • Gently remove the SIM card tray from the device using a spudger.

    Traducir

  2. Droid Ultra XT1080 Power Button Replacement: paso 2, imagen 1 de 1

    • After SIM card removal press the spudger between the plastic case and the frame until you hear a snap.

    • Work your way around the device until all the clips are released.

    • Be gentle while doing this so you don't crack or break the plastic.

    Traducir

  3. Droid Ultra XT1080 Power Button Replacement: paso 3, imagen 1 de 1

    • Remove the five screws on top of the device with a T5 Torx.

    • Remove the single screw holding the camera with a T4 Torx.

    • Remove the two screws on the bottom of the device with a T5 Torx.

    Traducir

  5. Droid Ultra XT1080 Power Button Replacement: paso 4, imagen 1 de 2 Droid Ultra XT1080 Power Button Replacement: paso 4, imagen 2 de 2

    • Once the screws are removed, use a nylon spudger and lift up on the two plastic pieces that were secured by the screws.

    Traducir

  6. Droid Ultra XT1080 Power Button Replacement: paso 5, imagen 1 de 1

    • Remove the four T5 Torx screws securing the motherboard.

    Traducir

  7. Droid Ultra XT1080 Power Button Replacement: paso 6, imagen 1 de 1

    • Gently pry the motherboard out of the frame using the plastic opening tool.

    Traducir

  8. Droid Ultra XT1080 Power Button Replacement: paso 7, imagen 1 de 2 Droid Ultra XT1080 Power Button Replacement: paso 7, imagen 2 de 2

    • Once motherboard is removed you have gained access to the power button.

    • Gently, using a pair of angled tweezers pull on the power button to remove it.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

knoyes

Miembro Desde 10/30/18

785 Reputación

5 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

UMass Dartmouth, Team S3-G8, Peak Fall 2018 Miembro de UMass Dartmouth, Team S3-G8, Peak Fall 2018

UMASSD-PEAK-F18S3G8

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 11

Todo El Tiempo: 300