Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently remove the SIM card tray from the device using a spudger.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
After SIM card removal press the spudger between the plastic case and the frame until you hear a snap.
-
Work your way around the device until all the clips are released.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the five screws on top of the device with a T5 Torx.
-
Remove the single screw holding the camera with a T4 Torx.
-
Remove the two screws on the bottom of the device with a T5 Torx.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once the screws are removed, use a nylon spudger and lift up on the two plastic pieces that were secured by the screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the four T5 Torx screws securing the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently pry the motherboard out of the frame using the plastic opening tool.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Tweezers$3.99-
Once motherboard is removed you have gained access to the power button.
-
Gently, using a pair of angled tweezers pull on the power button to remove it.
-