Introducción

Removing the cover of the Apple IIc is the precursor to any repair on a computer and it allows you to view the eternal workings of this device.

Partes

No se requieren partes.

  1. Remove the six 19 mm long screws with a #2 Phillips head screwdriver. Remove the six 19 mm long screws with a #2 Phillips head screwdriver.
    • Remove the six 19 mm long screws with a #2 Phillips head screwdriver.

  2. Release the catch by pushing it in using a plastic opening tool. The catch is off-center, but in line with the middle of the speaker underneath.
    • Release the catch by pushing it in using a plastic opening tool.

      • The catch is off-center, but in line with the middle of the speaker underneath.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Slide the case toward the ports on the back, then grip under the catch and pull up while moving toward the ports to remove. Slide the case toward the ports on the back, then grip under the catch and pull up while moving toward the ports to remove.
    • Slide the case toward the ports on the back, then grip under the catch and pull up while moving toward the ports to remove.

  5. Lift the handle straight up to remove. Lift the handle straight up to remove.
    • Lift the handle straight up to remove.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Equipo

Cal Poly, Team 21-23, Maness Fall 2011 Miembro de Cal Poly, Team 21-23, Maness Fall 2011

CPSU-MANESS-F11S21G23

4 Miembros

6 Guías creadas

The //c is designed to be popped open. Remove the 6 screws as described. Flip the handle down and tip the //c 3-4 inches over a hard surface and let it drop. The handle will pop the rear catches off safely.

It looks and sounds scary but it's how Apple trained dealer techs to open the machine. There isn't anything in a //c that is shock sensitive.

Sean Fahey - Contestar

Wow! Worked perfectly as described — and nothing broke. Hard to imagine I always had used steps 2, 3 (after removing the ports cover) and 4 in the past. Thanks, Sean!

mthmn1 - Contestar

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 8

Últimos 30 Días: 56

Todo El Tiempo: 5,671