Saltar al contenido principal

Dell XPS 13 9365 2-in-1 Speakers Replacement

Qué necesitas

  1. Dell XPS 13 9365 2-in-1 Speakers Replacement, Battery: paso 1, imagen 1 de 1
    • Use a Torx T4 screwdriver to remove the eight screws (M2x3) that secure the base cover to the palm-rest assembly.

  2. Dell XPS 13 9365 2-in-1 Speakers Replacement: paso 2, imagen 1 de 1
    • Use your fingertips to lift the system badge open and reveal the single case screw.

    • Use a Phillips #000 screwdriver to remove the screw (M1.6x4) that secures the base cover to the palm-rest assembly.

  3. Dell XPS 13 9365 2-in-1 Speakers Replacement: paso 3, imagen 1 de 1
    • Starting from the front corner of the computer, pry up the base cover using a spudger and lift the base cover off the palm-rest assembly.

  4. Dell XPS 13 9365 2-in-1 Speakers Replacement: paso 4, imagen 1 de 1
    • Disconnect the battery cable from the system board.

  5. Dell XPS 13 9365 2-in-1 Speakers Replacement: paso 5, imagen 1 de 1
    • Use a Phillips #000 screwdriver to remove the two screws (M1.6x4) that secure the battery to the palm-rest assembly.

  6. Dell XPS 13 9365 2-in-1 Speakers Replacement: paso 6, imagen 1 de 1
    • Use a Phillips #000 screwdriver to remove the six screws (M2x3) that secure the battery to the palm-rest assembly.

  7. Dell XPS 13 9365 2-in-1 Speakers Replacement: paso 7, imagen 1 de 1
    • Lift the battery off the palm-rest assembly.

  8. Dell XPS 13 9365 2-in-1 Speakers Replacement, Speakers: paso 8, imagen 1 de 1
    • Peel off the tape securing the speaker cable to the system board.

  9. Dell XPS 13 9365 2-in-1 Speakers Replacement: paso 9, imagen 1 de 1
    • Disconnect the speaker cable from the motherboard.

  10. Dell XPS 13 9365 2-in-1 Speakers Replacement: paso 10, imagen 1 de 1
    • Note the speaker-cable routing and peel off the tape that secures the speaker cable to the system board.

  11. Dell XPS 13 9365 2-in-1 Speakers Replacement: paso 11, imagen 1 de 2 Dell XPS 13 9365 2-in-1 Speakers Replacement: paso 11, imagen 2 de 2
    • Use a Phillips #000 screwdriver to remove the four screws (M2x2) that secure the speakers to the palm-rest assembly.

  12. Dell XPS 13 9365 2-in-1 Speakers Replacement: paso 12, imagen 1 de 1
    • Lift the speakers, along with its cables, off the palm-rest assembly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 9

Todo El Tiempo: 438