Saltar al contenido principal

Dell Venue 8 Rear Case/Midframe Replacement

Qué necesitas

  1. Dell Venue 8 Rear Case/Midframe Replacement, Rear Case/Midframe: paso 1, imagen 1 de 1
    • Hold the device with the screen facing up. Gently wedge your plastic opening tool into the crease, and run it along the perimeter of the case

    • You will hear click sounds as the clips unhinge

    • Remove the back panel of the device.

  2. Dell Venue 8 Rear Case/Midframe Replacement: paso 2, imagen 1 de 3 Dell Venue 8 Rear Case/Midframe Replacement: paso 2, imagen 2 de 3 Dell Venue 8 Rear Case/Midframe Replacement: paso 2, imagen 3 de 3
    • Remove the 14 screws with the T-5 Torx screwdriver. (11 black 3.6mm screws, and three 4.45mm screws)

    • The silver screws are marked with an "S" or a sticker [S1.6(Silver)] See the corrected image

    • 4.45mm Silver screws

    • 3.6mm Black screws

    • Gently snap the perimeter clips open, and remove the internal plastic case.

Conclusión

To reassemble your device, follow these instructions in reverse order.

7 personas más completaron esta guía.

Andrea

Miembro Desde 02/19/15

1,056 Reputación

5 Guías creadas

Equipo

USF Tampa, Team 9-2, Leahy Winter 2015 Miembro de USF Tampa, Team 9-2, Leahy Winter 2015

USFT-LEAHY-W15S9G2

3 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 2,432