Dell Precision M3800 Touch Pad Replacement

Introducción

If the Dell Precision M3800 touchpad is unresponsive or not working, use this guide to replace the touchpad.

The touchpad works as the “mouse” for the laptop, and an unresponsive touchpad would stop the user from using the laptop, unless the user uses an external mouse.

Before beginning, be sure to power down the laptop, and unplug from the external power source(s).

Qué necesitas

Paso 1 Back Cover

Dell Precision M3800 Touch Pad Replacement, Back Cover: paso 1, imagen 1 de 2

Dell Precision M3800 Touch Pad Replacement, Back Cover: paso 1, imagen 2 de 2

Be sure to power off and unplug your device before you begin your repair.
Use a T5 Torx screwdriver to unscrew the ten 3mm screws on the laptop back cover.
iFixit’s magnetic project mat is great for keeping the screws in one place.
Lift up the silver cover from the back panel to reveal two screws.
Use a Phillips screwdriver to remove the two screws underneath the silver cover.

Editar

Paso 2

Use an opening tool to pry around the edges of the back panel to loosen the panel.
Remove the back panel.

Editar

Paso 3 Battery

Dell Precision M3800 Touch Pad Replacement, Battery: paso 3, imagen 1 de 1

Disconnect the battery cable from the system board [1].
Use a Phillips screwdriver to remove the four screws securing the battery to the laptop.
Lift the battery off the computer [2].

Editar

Paso 4 Touch Pad

Dell Precision M3800 Touch Pad Replacement, Touch Pad: paso 4, imagen 1 de 3

Dell Precision M3800 Touch Pad Replacement, Touch Pad: paso 4, imagen 2 de 3

Dell Precision M3800 Touch Pad Replacement, Touch Pad: paso 4, imagen 3 de 3

Remove the wire that connects the touch pad with the motherboard with a hooked pry tool (Spudger 3) and by pulling the pull tab to safely remove the wire.

Editar