Introducción

If your laptop is experiencing slow boot times, poor performance, display issues, or won't boot at all, it may be time to replace the RAM, also referred to as the memory.

To replace the RAM on the Dell Latitude E4310, follow this guide.

Partes

No se requieren partes.

  1. Power down the laptop and remove all power cords.
    • Power down the laptop and remove all power cords.

  2. Push in the battery release button with your thumb. Pull up on the battery to remove.
    • Push in the battery release button with your thumb.

    • Pull up on the battery to remove.

  3. Unscrew the two 4mm Phillips #1 screws. Unscrew the two 4mm Phillips #1 screws.
    • Unscrew the two 4mm Phillips #1 screws.

  4. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  5. Lift up the panel with your finger. The screws are clipped to the panel and will remain attached.
    • Lift up the panel with your finger.

    • The screws are clipped to the panel and will remain attached.

  6. Pry the two metal clips away from the RAM module until the module pops out of place. Pry the two metal clips away from the RAM module until the module pops out of place.
    • Pry the two metal clips away from the RAM module until the module pops out of place.

  7. Slide the RAM backwards out of its socket to remove. Slide the RAM backwards out of its socket to remove.
    • Slide the RAM backwards out of its socket to remove.

  8. Repeat steps 1 and 2 to remove the second RAM module. Repeat steps 1 and 2 to remove the second RAM module.
    • Repeat steps 1 and 2 to remove the second RAM module.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 4

Últimos 30 Días: 19

Todo El Tiempo: 147