Skip to main content

Introducción

Use this guide to replace the back cover of your device. You'll need a Phillips #0 Screwdriver and a couple of plastic opening tools to complete this guide.

Partes

No se especificaron partes.

  1. Flip your device over so the back cover is facing you.
    • Flip your device over so the back cover is facing you.

    • Using a Phillips #0 Screwdriver, remove the ten 7mm screws holding the back cover in place.

  2. Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora

    Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora
  3. Insert a plastic opening and run it along the edge of the back cover. Do this until the entire back cover can be removed.
    • Insert a plastic opening and run it along the edge of the back cover. Do this until the entire back cover can be removed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Justin Ogihara

Miembro Desde 18/09/17

5,404 Reputación

13 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

107 Miembros

9,387 Guías creadas

Añadir comentario

Ver Estadísticas:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

Global: 311