Saltar al contenido principal

Introducción

Are you having trouble connecting your Chromebook to the internet? You network card may be damaged, and in need of replacement! Follow this easy guide to quickly get your computer connected to the internet again.

  1. Remove the eleven 3mm Phillips #1 screws. Remove the eleven 3mm Phillips #1 screws.
    • Remove the eleven 3mm Phillips #1 screws.

  2. Use a plastic opening tool to gently remove the back panel.
    • Use a plastic opening tool to gently remove the back panel.

    • It can be easier to pry open near a corner.

  3. Use your fingers to remove the connecting cable to the battery unit. Firmly grab the cord closest to the motherboard connection and pull straight back.
    • Use your fingers to remove the connecting cable to the battery unit. Firmly grab the cord closest to the motherboard connection and pull straight back.

  4. Remove the four 2mm screws on the sides of the battery.
    • Remove the four 2mm screws on the sides of the battery.

  5. To remove the battery, lift up on one side to get your fingers underneath and lift away.
    • To remove the battery, lift up on one side to get your fingers underneath and lift away.

  6. Use #1 Phillips screwdriver to remove the 1mm screw in the network card. Use #1 Phillips screwdriver to remove the 1mm screw in the network card.
    • Use #1 Phillips screwdriver to remove the 1mm screw in the network card.

  7. Disconnect the network card from motherboard socket.
    • Disconnect the network card from motherboard socket.

  8. Disconnect 2 cable connectors from network card.
    • Disconnect 2 cable connectors from network card.

    • If the cables are stuck, continue to gently wiggle them until they disconnect.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Brett Raymond

Miembro Desde 01/11/18

421 Reputación

3 Guías creadas

Equipo

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 8

Todo El Tiempo: 160