Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
The Con Board is located under the back cover. This guide will help you remove and replace the Back Con Board from your DJI Phantom 4 Advanced Remote Controller.
Many issues that arise with a DJI Remote Controller are caused by a faulty Back Con Board.
Before beginning, disconnect your drone and power off the remote completely.
Qué necesitas
-
-
Remove the four screws with a Torx T8 screwdriver to access the back con board.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.