Repara tus cosas Comunidad Tienda

Crain Jamb Saw 775 2014 Blade Replacement

Introducción

This guide will demonstrate how to replace the blade in your Crain 775 Jamb Saw.

Qué necesitas

  1. Crain Jamb Saw 775 2014 Blade Replacement, Unfasten the blade: paso 1, imagen 1 de 3 Crain Jamb Saw 775 2014 Blade Replacement, Unfasten the blade: paso 1, imagen 2 de 3 Crain Jamb Saw 775 2014 Blade Replacement, Unfasten the blade: paso 1, imagen 3 de 3

    • Unplug the power cord before you begin.

    • The saw blade is sharp, in order to prevent injury, you may want to wear protective gloves when handling it.

    • Depress the spindle lock button to prevent the blade from spinning when you unfasten it.

    • While depressing the spindle lock, use a 3/16 hex key to remove the socket set screw securing the blade in place.

    Editar

  3. Crain Jamb Saw 775 2014 Blade Replacement, Remove the blade: paso 2, imagen 1 de 2 Crain Jamb Saw 775 2014 Blade Replacement, Remove the blade: paso 2, imagen 2 de 2

    • Remove the blade.

    • When replacing with a new blade, ensure the two pegs on the face of the rotor mate with the holes in the blade.

    • Tighten the new blade with the socket set screw firmly before use. Ensure the spindle lock is pulled before turning the saw on.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

Tarun Thiruma

Miembro Desde 11/20/19

36,244 Reputación

134 Guías creadas

Insignias: 32

+ 29 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 11

Todo El Tiempo: 349