Saltar al contenido principal

Craig CMP801 Volume Controls Replacement

Qué necesitas

  1. Craig CMP801 Volume Controls Replacement, Back Cover: paso 1, imagen 1 de 2 Craig CMP801 Volume Controls Replacement, Back Cover: paso 1, imagen 2 de 2
    • Locate the opening line between the cover and the device. Then locate the groove near the charging port.

  2. Craig CMP801 Volume Controls Replacement: paso 2, imagen 1 de 2 Craig CMP801 Volume Controls Replacement: paso 2, imagen 2 de 2
    • Use a metal spudger to separate the back cover from the front touch screen.

    • To do this, place the metal spudger in between the groove near the charging port of the device to unlatch the first clip.

  3. Craig CMP801 Volume Controls Replacement: paso 3, imagen 1 de 2 Craig CMP801 Volume Controls Replacement: paso 3, imagen 2 de 2
    • Continue to separate all of the clips around the device until the back cover comes off completely.

  4. Craig CMP801 Volume Controls Replacement, Volume Controls: paso 4, imagen 1 de 2 Craig CMP801 Volume Controls Replacement, Volume Controls: paso 4, imagen 2 de 2
    • After taking out the back cover, locate the black flap.

    • Open the black flap with the plastic opening tools.

    • Be careful not to break the flap when you open it.

  5. Craig CMP801 Volume Controls Replacement: paso 5, imagen 1 de 2 Craig CMP801 Volume Controls Replacement: paso 5, imagen 2 de 2
    • Once the tab is released, use the angled tweezers to take out the tab.

    • Be careful not to scratch the tab.

  6. Craig CMP801 Volume Controls Replacement: paso 6, imagen 1 de 2 Craig CMP801 Volume Controls Replacement: paso 6, imagen 2 de 2
    • Use the angled tweezers to pull the volume controls out and replace it with a new one.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 250