Repara tus cosas Comunidad Tienda

Circular Saw Blade Replacement

Introducción

Whether your circular saw blade is worn out, or you just want to switch it out for a different style, it’s really easy to swap out blades on pretty much any circular saw—and it takes just a few minutes.

This guide uses a Ryobi P504G circular saw, but the process is very similar for most circular saws.

Qué necesitas

  1. Circular Saw Blade Replacement, Blade: paso 1, imagen 1 de 2 Circular Saw Blade Replacement, Blade: paso 1, imagen 2 de 2

    • Unplug your circular saw or remove the battery before replacing the blade!

    Editar

  2. Circular Saw Blade Replacement: paso 2, imagen 1 de 3 Circular Saw Blade Replacement: paso 2, imagen 2 de 3 Circular Saw Blade Replacement: paso 2, imagen 3 de 3

    • Press and hold down the blade lock button to keep the blade from turning while you loosen it.

    • Loosen the arbor's hex bolt in the center of the blade using a 5mm hex key, making sure to loosen clockwise since the bolt threads are reversed.

    • Your circular saw may already come with a hex key.

    Editar

  3. Circular Saw Blade Replacement: paso 3, imagen 1 de 2 Circular Saw Blade Replacement: paso 3, imagen 2 de 2

    • Once loosened, continue unscrewing the bolt with your fingers and remove it from the saw.

    Editar

  5. Circular Saw Blade Replacement: paso 4, imagen 1 de 2 Circular Saw Blade Replacement: paso 4, imagen 2 de 2

    • Remove the arbor washer.

    Editar

  6. Circular Saw Blade Replacement: paso 5, imagen 1 de 3 Circular Saw Blade Replacement: paso 5, imagen 2 de 3 Circular Saw Blade Replacement: paso 5, imagen 3 de 3

    • Completely retract the blade guard.

    • You can hold the blade guard in place with a clamp while you change the blade.

    Editar

  7. Circular Saw Blade Replacement: paso 6, imagen 1 de 3 Circular Saw Blade Replacement: paso 6, imagen 2 de 3 Circular Saw Blade Replacement: paso 6, imagen 3 de 3

    • Set the circular saw on its side and carefully lift up the blade to unseat it from the arbor.

    • Slowly slide out the blade.

    • Use extreme caution when handling the blade!

    Editar

  8. Circular Saw Blade Replacement: paso 7, imagen 1 de 1

    • When inserting the new blade, be sure to note its rotation and install it in the correct orientation.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

Craig Lloyd

Miembro Desde 02/10/16

35,519 Reputación

82 Guías creadas

Insignias: 41

+ 38 más insignias

3 comentarios

Hello!
I learned a lot of important things, but I have a Question that is this Circular Saw perfect to cut Concrete Pavers?

F6 Adhesive Tape - Contestar

I think you need a cutting disc in your circular saw

to cut concrete.

Toon Konings - Contestar

the problem is that cutting concrete with a concrete disk produces a lot of concrete dust. It will kill your machine. It is not possible to stop the dust by pouring water as you would do with a tile cutting machine.

vief - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 16

Ultimos 7 días: 65

Ultimos 30 días: 285

Todo El Tiempo: 6,849