Introducción
This guide will show you how to replace the front cover of your camera if it is broken or worn.
Qué necesitas
-
-
Remove four 2.7 mm screws, two on each side, from the camera with a JIS 000 screwdriver.
-
Remove one 3.5 mm screw on the bottom of the camera with a JIS 000 screwdriver.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.