Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Canon PowerShot SX120 IS Control Dial Replacement

Qué necesitas

  1. Canon PowerShot SX120 IS Control Dial Replacement, Back Cover: paso 1, imagen 1 de 1

    • Turning the camera so the screen is facing you.

    • Remove the two black 3.4 mm screws with a Phillips #00 screwdriver.

    Traducir

  2. Canon PowerShot SX120 IS Control Dial Replacement: paso 2, imagen 1 de 1

    • Put the camera with the lens facing up and turn it to the side so the DC IN A/V OUT DIGITAL is facing you.

    • Remove the single black 3.4 mm screw with a Phillips #00 screwdriver.

    Traducir

  3. Canon PowerShot SX120 IS Control Dial Replacement: paso 3, imagen 1 de 2 Canon PowerShot SX120 IS Control Dial Replacement: paso 3, imagen 2 de 2

    • Put the camera with the lens facing up, and turn it to the side where the battery cover is located.

    • Remove the three black 3.4 mm screws with a Phillips #00 screwdriver.

    Traducir

  5. Canon PowerShot SX120 IS Control Dial Replacement: paso 4, imagen 1 de 2 Canon PowerShot SX120 IS Control Dial Replacement: paso 4, imagen 2 de 2

    • Put the camera with the lens facing up, turn it to the side where the compartment of the battery (CR1220) for time/date is located.

    • Remove the single black 3.4 mm screw with a Phillips #00 screwdriver.

    Traducir

  6. Canon PowerShot SX120 IS Control Dial Replacement: paso 5, imagen 1 de 1

    • Put the camera with the lens facing down, and turn it to the side where the DC IN A/V OUT DIGITAL cover and the silver lanyard attachment are located.

    • Open the DC IN A/V OUT DIGITAL cover.

    • Remove the single black 3.4 mm screw with a Phillips #00 screwdriver.

    Traducir

  7. Canon PowerShot SX120 IS Control Dial Replacement: paso 6, imagen 1 de 3 Canon PowerShot SX120 IS Control Dial Replacement: paso 6, imagen 2 de 3 Canon PowerShot SX120 IS Control Dial Replacement: paso 6, imagen 3 de 3

    • Turn the camera with the lens facing down.

    • Opening the camera can be challenging. Don't get discouraged if it takes you a few tries before the camera is opened.

    • Use the iFixit opening tool to make leverage. Insert the opening tool in the seam where the front case and the back case assemble.

    • Carefully put pressure on the opening tool so the cover can gradually open.

    • Slowly slide the opening tool along the gap and around the edge of the camera.

    • When you are dissembling the back cover, the DC IN A/V OUT DIGITAL cover will also disassemble and fall off.

    Traducir

  8. Canon PowerShot SX120 IS Control Dial Replacement: paso 7, imagen 1 de 1

    • Remove the back cover and the DC IN A/V OUT DIGITAL cover from the camera.

    Traducir

  9. Canon PowerShot SX120 IS Control Dial Replacement, Control Dial: paso 8, imagen 1 de 2 Canon PowerShot SX120 IS Control Dial Replacement, Control Dial: paso 8, imagen 2 de 2

    • Once you have removed the back cover this is what the camera will look like.

    • Locate the Control Dial.

    Traducir

  10. Canon PowerShot SX120 IS Control Dial Replacement: paso 9, imagen 1 de 3 Canon PowerShot SX120 IS Control Dial Replacement: paso 9, imagen 2 de 3 Canon PowerShot SX120 IS Control Dial Replacement: paso 9, imagen 3 de 3

    • Once the Control Dial is located carefully remove it using tweezers.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 9 otros colaboradores

Destiny Bretado

Miembro Desde 03/20/14

122 Reputación

1 Guía escrita

Insignias: 5

+ 2 más insignias

Equipo

New Mexico State, Team 1-3, Easley Spring 2014 Miembro de New Mexico State, Team 1-3, Easley Spring 2014

NMSU-EASLEY-S14S1G3

4 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 12

Todo El Tiempo: 1,339